 |
คุณสแน๊ป Snapnap.jjp@gmail.com094-424-6252 ID LINE : Snapnap. |
 |
คุณมิ้งค์(ประชาสัมพันธ์) atchara.jp09@gmail.com092-455-4525 ID LINE : me-miki |
 |
คุณแอน asulawann@hotmail.com094-892-2466 ID LINE : sulawan26 |
 |
คุณอุ้ม aum20092009@windowslive.com 088-7583745 ID LINE : 0628238718 |
 |
คุณโน๊ต tokyosunset@gmail.com094-197-4644 ID LINE : nottosan |
 |
คุณออย sumonta_oil@hotmail.com092-914-4422 ID LINE : oiljjpp |
 |
คุณแหม่ม mammee2522@gmail.com094-9955696 ID LINE : 0873872696 |
 |
คุณนินิว newnaka_jjp@hotmail.com088-2892369,099-4541449 ID LINE:0875970137 |
 |
คุณแอน chatwadee.srl@gmail.com096-1565393 ID LINE:0961565393 |
 |
คุณปุ้ม pum_ka18@hotmail.com093-3992566 ID LINE: kanita.k |
 |
คุณนัท nut_nut33@outlook.com088-2740420 ID LINE : nut-nutty- |
 |
คุณแอน ann_amari@hotmail.com065-641-4247 ID LINE : anamr.n |
 |
คุณแนน nanny_jjp@hotmail.com080-585-4546 ID : nanny-tiger |
 |
คุณบอส 095-126-9999 ID LINE : @jjpsupply |
ฝ่ายขายกลาง
 |
piboon@jjpsupply.comID LINE : @jjpsupply |
กรุณาเลือกส่ง
เพียงอีเมล์เดียว
เพียงอีเมล์เดียว
Category >> LENOX ใบเลื่อย BI-METAL JIG SAW BLADE FOR BOSCH TYPE
รหัส : 085-12-BT314Sรุ่น : 085-12-BT314S
LENOX ใบเลื่อย BI-METAL JIG SAW BLADE FOR BOSCH TYPE
| รหัสสินค้า | ความยาวxฟันเลื่อย | Milled or Ground | Application |
| 085-12-BT314S | 3" x 14T | Milled | Steels: 2.5-6mm. Non-ferrous |
| metal: 2.5-10mm. | |||
| 085-12-BT318S | 3" x 18T | Milled | Stainless steel, structural steel: |
| 1.5-5mm. Non-ferrous metal: | |||
| 1.5-8mm. | |||
| 085-12-BT320SC | 3" x 20T | Ground | Ground teeth for fine contour |
| cutting in wood, veneer, laminate | |||
| and plastic: 1.5-13mm. | |||
| 085-12-BT324S | 3" x 24T | Milled | Stainless steel, sheet metal: Up to |
| 3.2mm thick. Non-ferrous metal: | |||
| Up to 6mm thick. | |||
| 085-12-BT332S | 3" x 32T | Milled | Thin stainless steel, sheet metal: |
| Up to 1.6mm. Non-ferrous metal: | |||
| Up to 3.2mm thick. | |||
| 085-12-BT406S | 4-1/2" x 6T | Milled | Fast, rough cutting in wood and |
| composition material: 10-50mm | |||
| thick. | |||
| 085-12-BT410S | 4" x 10T | Milled | Woods: 6-50mm thick. All steels: |
| 3.2-13mm. Soft metals: 3.2-25mm. | |||
| 085-12-BT416SC | 4" x 6T | Ground | Ground teeth for clean contour cuts |
| in wood, plastic and composition | |||
| material: 10-38mm thick. | |||
| 085-12-BT450S | 4" x 10T | Ground | Ground teeth for fast, smooth cuts |
| in wood, plastic and composition | |||
| material: 5-38mm thick. | |||
| 085-12-BT450SR | 4" x 10T | Ground | Ground teeth for chip-free down |
| cutting in formica, laminate and | |||
| plastic: 5-38mm. | |||
| 085-12-BT456S | 4-1/2" x 6T | Ground | Ground teeth for fast, clean cutting |
| in wood, plastic and composition | |||
| material: 10-50mm thick. | |||
| 085-12-BT518S | 5-1/4" x 18T | Milled | Non-ferrous metal: 1.5-8mm. |
| 085-12-BT686S | 6" x 6T | Milled | Fast, rough cutting in wood and |
| composition material: 10-89mm. | |||
| 085-12-GT300S | 3" | Medium | Cast iron, fibreglass, ceramic tile, |
| Carbide | hard plaster. | ||
| Grit |
